The router may be mounted in a number of ways and should be completed by a professional installer.
Refer to the following for best practices:
Mark the desired mounting location on the ceiling, wall, or kiosk using a pen or marker.
Ensure the mounting location is away from RF interfering materials and objects such as reflective surfaces, brick, concrete, microwaves, and so on.
Pre-drill holes for the mounting screws.
Use M3 size wall anchors and screws or other screw-securing accessories to ensure the device is securely mounted in place. Refer to the Location Considerations section of this document. Avoid over-tightening the mounting screws to prevent damaging the router's mount points.
Additional Mounting Options
An optional DIN rail mounting bracket is available (ordered separately) for the router. The DIN rail mounting bracket holds the router vertically such that the Expansion Modules are facing up. The mounting bracket not only enhances your mounting options, it also saves space inside of racks or cabinets.
Product | Part number | Compatibility |
|---|---|---|
DIN Rail Mounting Bracket | 170904-XXX1 | S400 Series Router S700 Series Semi-Ruggedized Router R920 Series Ruggedized Router R980 Series Ruggedized Router |
An optional ceiling mount bracket is also available (ordered separately) for the S400 and S450 routers. The ceiling mounting bracket enables easy installation, typically to office ceiling T-bars.
Product | Part number | Compatibility |
|---|---|---|
Ceiling Mounting Bracket | 170920-XXX1 | S400 Series Router |
1Part numbers increment as new versions are released. Contact Ericsson Cradlepoint to order the part.