Refer to the following table for information about the LED Display.
LED DISPLAY | BEHAVIOR | ||
|---|---|---|---|
|
| No Light = Powered off. | |
| Blinking White = WAN online and not connected to NetCloud Manager. | ||
| Solid White = Connected to NetCloud Manager. | ||
| Blinking Green = Modem is connecting. | ||
| Blinking Yellow = Modem is in the process of resetting. | ||
| Solid Red = Offline. | ||
| Blinking Red = Data connection error. No modem connection possible. | ||
| Blinking Cyan = Factory reset. | ||
Using Cellular Health Mode
Cellular Health Mode is a special LED Display mode that indicates the health of the cellular connection using solid or flashing colors. To enter this mode, do the following:
Press and hold the Factory Reset Button for 2-3 seconds and then release. The LED Display will flash blue during the button press, and then flash the sequence red, yellow, and green for 1 second each.
Once the LED Display is in Cellular Health Mode, it remains in that mode for 20 seconds. The LED Display then reverts to normal behavior automatically by again flashing green, yellow, and red for 1 second each. Repeat Step 1 to return to Cellular Health Mode.
When in Cellular Health Mode, the LED Display behavior is as follows:
LED DISPLAY | CELLULAR HEALTH MODE BEHAVIOR | |||
|---|---|---|---|---|
|
| Flashing red | Poor Cellular Health = Cellular health is below 25%. | |
| Flashing yellow 3 seconds on, 1 second off | Fair Cellular Health = Cellular health is 25-49%. | ||
| Solid blue | Good Cellular Health = Cellular health is 50-74%. | ||
Solid green | Excellent Cellular Health = Cellular health is 75-100%. | |||
