The product has 4 LED indicators: LTE, SYNC, PWR, and WAN. The table below describes the definition of each LED:
Indicator | Behavior | |
|---|---|---|
LTE | Indicates status of LTE connection. | |
No light = No LTE service to user | ||
Solid blue= Cellular AP is up and providing service, but no devices are currently attached | ||
Flashing blue = Cellular AP is actively working, with one or more devices attached | ||
Flashing red = Abnormal state:
| ||
Flashing blue alternating with flashing red = Cellular AP is upgrading | ||
SYNC | Indicates sync status. | |
No light = Not connected | ||
Solid green = Successfully synchronizing to sync source (GPS/GNSS/NTP server) | ||
PWR | Detects that the unit has power. | |
No light = Not receiving power - check the power source connection | ||
Solid green = Powered on | ||
WAN | Detects readiness to provide LTE small cell service. | |
No light = Failed to connect to default gateway | ||
Flashing green = Reset button was pushed (for at least 10 seconds) and when button is released Cellular AP will be reset to factory defaults | ||
Solid green = Connected to default gateway successfully | ||