Find a location for the cellular AP indoors that provides good coverage and is within reach of all required cables (PoE or power adapter). Use the mounting plate as a template for the screw locations.
After attaching the mounting plate to the wall with the hooks facing upward, fit the cellular AP over the hooks on the mounting plate and lock the cellular AP in place by sliding downwards.
Attach the GNSS Antenna (Optional)
A small metal-backed indoor GNSS antenna is included in the box. Attach the cord from the antenna to the connector marked with GPS and tighten. The length of the cable (3 m or 10 ft) should allow the antenna to be placed near a window, which will allow you to get a good signal. If you are using double sided tape (not included) to mount the antenna, be sure to place it on a smooth surface.