1. Insert an active 2FF-sized SIM card into the device
 |
- Slide the SIM door cover open.
- Insert the SIM card notch end first with the metal contacts down into the SIM-1 slot. The SIM will click into place. Depress the SIM again to remove, if necessary.
- If using two SIM cards, insert the secondary SIM into SIM-2 slot, in the same manner as the first.
- Slide the cover back into place and secure with the SIM cover screw (included).
2. Attach the antennas
- Attach the LTE and WiFi antennas (included) to the connectors. The antennas are jointed, which enables positioning for optimal signal reception. NOTE: WiFi antennas are not included with the IBR650B.
- To attach each antenna:
- Hold the antenna straight and twist the base of the antenna onto the connection port on the side of the router.
- Do not over-tighten. The maximum recommended torque is 4 in-lbs.
3. Connect the power cable
- Insert four-pin end of the AC adapter to the four-pin port on the router.
- Plug the adapter into an electrical socket.
4. Mount the device
Refer to the Location Considerations section of this document and have a professional install the device.
Return to Top