Connect the WAN Source
Connect the ethernet WAN source to the WAN port of the CR4250 (Port 0 is the default).
Default WAN configuration is DHCP
If a static IP address is required for connectivity, refer to the following article: NCOS: How to connect a wired WAN connection with a static IP address to a Cradlepoint router.
Connect the Power Source
Plug the provided power supply (100-240V, 50-60Hz; 1.7A max without PoE, 4.1A max with PoE) into an electrical outlet. Then connect the power supply to the router.
Ensure power is switched on (O = OFF, – = ON):
When you set the power switch to the ON ( – ) position; watch for the power LED to illuminate. Refer to the Understanding LEDs section of this document for more information about LED lights on the CR4250 router.
Once the device is powered on, log into NetCloud manager and complete the device setup. Refer to the Connecting to NetCloud section in this document for more information.