Managing Wi-Fi with NetCloud Manager - Cradlepoint-Wi-Fi-Collection

NetCloud Feature: Networking; Networking > Wireless LAN
Language: English
ft:sourceName: Paligo_Prod

Overview of Wi-Fi with Ericsson Cradlepoint Devices
Wi-Fi on Ericsson Cradlepoint Routers
Wi-Fi Overview
Minimum Requirements
Configuring Wi-Fi
Configuring Wi-Fi Using WPA Personal Mode
Configuring RADIUS/RadSec Using WPA Enterprise Mode
Binding a RADIUS Service to a LAN
Configuring Dual-Band Wi-Fi
Configuring Advanced Wi-Fi Settings
Managing and Monitoring Wi-Fi
Wi-Fi Best Practices
Changing the Wi-Fi Password
Enabling and Disabling Wi-Fi on a Router
Enabling and Disabling an SSID
Removing a Wi-Fi Interface from a Local IP Network
Changing the Wireless Channel on a Router
Limiting the Maximum Number of Clients per Wi-Fi SSID
Tuning the Power of Radio Transmissions Using TX Power Percentage Slider
Configuring Wi-Fi Monitor Mode
Running a Wi-Fi Site Survey
Viewing Wi-Fi Information from the Router Dashboard
Troubleshooting Wi-Fi
Wi-Fi Clients Unable to Connect to Certain Models
Wi-Fi Connects But No Internet Access
Receiving a Wrong Password Error for Wi-Fi
Frequently Asked Questions about Wi-Fi
Wi-Fi as WAN
Wi-Fi as WAN Overview
Configuring Wi-Fi as WAN
Configuring WiFi as WAN or Wireless Client Mode on a Ericsson Cradlepoint Router
Configuring Wireless Scan Settings for WiFi as WAN or Roaming on IBR1700, IBR900, and R1900 Models
Creating a WiFi-as-WAN Profile for Hidden SSIDs on Ericsson Cradlepoint Devices
Enabling WiFi as WAN / Client Roaming
Configuring WPA Enterprise on Wi-Fi as WAN
Troubleshooting Wi-Fi as WAN
Reference Information for WiFi as WAN
Infrastructure Wi-Fi Channels
Unlicensed National Information Infrastructure (U-NII) Channels
Frequently Asked Questions about Wi-Fi as WAN
Captive Wi-Fi
Captive Wi-Fi Overview
Terms and Definitions
Supported Network Configurations
Backhaul Mode
AP Mode
WWAN through Captive (AP + Backhaul Mode)
Supported Devices
Upgrading Software
Configuring Captive Wi-Fi
Configuring the Captive Router
Determining If a Router Is in Accessory Mode
Putting a Router into Accessory Mode
Configuring the Controller
Changing the Controller’s IP Subnet (Optional)
Creating New WAN VLANs for Control Messages
Verifying the VLAN Configuration
Modifying Profiles in Connection Manager (Optional)
Profile Conditions
Profile Priority
Plugging In and Powering On
Validating the Setup
Configuring the Network
Command-Line Interface Commands for Captive Wi-Fi
Frequently Asked Questions About Captive Wi-Fi

Back to home page