Use the following procedure to configure a RADIUS server using Cradlepoint's RadSec feature. The RadSec feature implements TLS encryption for communication between Wi-Fi clients and a RADIUS server.
The RadSec feature is supported on the following routers:
E300
E3000
E400
R1900
R2105
R920 (non-captive mode)
E100
E102
IBR900
IBR1700
IBR200
IBR600C
S700
X10
R500
Log into NetCloud Manager.
Select in the left-side navigation panel.
Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.
Select and then .
Navigate to > .
Select either or .
Note
Ericsson Cradlepoint devices with a single Wi-Fi radio will have a section labeled Wi-Fi Settings.
Select the Wireless Access Point/SSID to modify and then click .
(Optional) Change the WiFI Name (SSID) to something easier to identify.
Select the Hidden checkbox if you want to prevent the router from broadcasting its SSID.
Select the Isolate checkbox if you want to prevent Wi-Fi clients from communicating with each other over the wireless network.
Note
The WMM checkbox (Wi-Fi Multimedia) is selected by default and is used to prioritize different types of traffic on your network. For example, with WMM, video streams are given higher priority than print jobs, since video streams need consistent throughput.
Select the Enabled checkbox to make the SSID is available to clients.
From the Security Mode drop-down list, select one of the WPA Enterprise modes.
Note
To protect your network from unauthorized users, choose the strongest security your attached devices support. WPA3 is recommended.
Important
As of NetCloud OS 7.24.40 the following security options are no longer available on Ericsson Cradlepoint devices: WEP, TKIP encryption, and WPA 1.
Select RadSec to use the RadSec feature. RadSec, when enabled, encrypts communication between the Ericsson Cradlepoint router and RADIUS server using TLS over TCP. Skip to Step 15.
Configure the following settings in the RADIUS section:
Primary IP – The IP address or DNS name of the primary RADIUS server.
Secondary IP (Optional) – The IP address or DNS name of an alternate RADIUS server.
Port – Port on the RADIUS server.
Shared Key – Shared key or password.
NAS ID – NAS ID is a unique string to identify the device, maximum 16 characters.
Dynamic VLAN – Place an authenticated user into the VLAN specified by the attributes received from the RADIUS server. Dynamic VLAN assignment is described in RFC 2868.
Change of Authorization (COA) – Enable the RADIUS server to send Disconnect and CoA (Change of Authorization) packets. Disconnect packets cause the session(s) to be terminated immediately, whereas CoA packets modify session authorization attributes.
Accounting:
Accounting Primary IP: Primary server IP or DNS
Accounting Secondary IP (Optional): Secondary server IP or DNS
Accounting Server Port: The server port used for accounting. The default port is 1813
Accounting Shared Key: The shared key or password for accounting.
RADIUS Test – Test the RADIUS server configuration.
Configure the following settings for RadSec:
Primary Server – The IP or DNS of the primary RADIUS server.
Nas IP – (Optional) The IP address of the NAS device.
NAS ID – The NAS ID, which is a unique string to identify the device (maximum 48 characters).
Server Port: The RadSec server port. The default is 2083.
Radsec Local Cert – RadSec local certificate.
RadSec Peer CA – Radsec CA used to validate the certificate for peer node. The Radsec Certicate CA will be used if no certificate is specified.
Accounting: Provides secure transmission of RADIUS accounting data over TLS.
Accounting Primary IP – The Primary server IP or DNS.
Accounting Server Por – The server port used for accounting. The default port is 2083
Accounting Local Cert – The certificates used for RadSec accounting messages.
Accounting Peer CA – The RadSec CA used to validate certificate for peer node. The Radsec Certificate CA will be used if it is not selected.
Click .