You can verify that the Controller has captured the Captive router using the following command on the Controller’s console:
[controller]$ get status/remote_modem/roster/
{
"00:30:44:22:35:e7": {
"ip_address": "169.254.0.18",
"uids": []
}
}In the following screenshot, the “uids” field is filled in with three UIDs. The longer entry is the UID of the Captive router that is used by the Captive Wi-Fi device handler. This is not the same as the UID of either of the Captive Wi-Fi VLANs built above. The two shorter entries are modem UIDs used by the Captive Modem device handler.
Note
The remote modem roster includes both captive modems and captive routers.