The router can be:
Placed on a flat surface, taking into account all location considerations, and checking that your chosen placement is within reach of a power source (desk mounting).
Mounted on a wall using two of the wall mounting holes on the underside. Use two M3 screws with head diameters between 6-7 mm to properly seat inside the keyhole slots. Screws and wall anchors are not supplied.
Ensure the mounting location complies with all location considerations.
You may need to pre-drill holes for the mounting screws, based on the mounting surface. Use a screw length that is appropriate for your mounting surface and application.
Depending on the mounting surface, you may need to use wall anchors to ensure the endpoint is securely mounted, particularly for the added battery weight (when used).
The pre-installed rubber feet can be left in place or peeled off, based on your preference.
Align the router mounting holes with the screws, inserting the screwheads into the router's mounting holes, and then slide toward the ground to lock the screwheads in place.