STEP 7: Powering Up the Router - X20 - E400 - E400-Quick-Start-Guide/STEP-7-Powering-Up-the-Router

E400 Enterprise Branch Router Quick Start Guide
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Quick Start Guide

  1. Connect the AC power adapter to an electrical outlet and then plug the other end into the router.

  2. Toggle the device power switch to the ON position (O = Off, – = On).

    Important

    Install the battery before toggling the switch to the ON position.

  3. Allow time for the router to run through its bootup sequence and establish a connection to NetCloud Manager.

E400_16-Power_Switch_and_Socket.png

See the Understanding LEDs section of this guide for more information about LED indicator status.