How do I add networks that are not local to be advertised by NEMO/DMNR? - How-do-I-add-networks-that-are-not-local-to-be-advertised-by-NEMO-DMNR/How-do-I-add-networks-that-are-not-local-to-be-advertised-by-NEMO/DMNR

• Advertise non-local networks into NEMO from the Cradlepoint Router
• Adverstise a client router's LAN into the VZW NEMO network
• Send traffic from a client LAN through the Cradlepoint's NEMO tunnel

• NEMO enabled
• Another network connected to the Cradlepoint that is running a separate LAN

1. Navigate to Networking > Tunnels > NEMO
2. Click Add in the Networks Routed by NEMO section
3. Specify the Network Address and Netmask of the client router's LAN
4. Click Save
   • The external network will now show up in the routed list with a (not local) designation
5. Navigate to Networking > Routing > Static and Policy Routing
6. Add a route to the external LAN, listing the client router's IP as the gateway
   • NCOS: Policy Based Routing
7. The client router may also need to have additional routes added if the Cradlepoint is not its default gateway