How to Configure VTI with Unnumbered Tunnel Interface - How-to-Configure-VTI-with-Unnumbered-Tunnel-Interface/How-to-Configure-VTI-with-Unnumbered-Tunnel-Interface

How to Configure VTI with Unnumbered Tunnel Interface

NetCloud Feature
Tunneling
ft:locale
en-US
ft:sourceName
Salesforce
allViewCount
4183
Document Type
Article

Configure VTI tunnel with an unnumbered tunnel interface (tunnel interface will not have a unique IP address)

  • IPSec VPN (VTI)
  • NCOS 7.0.40 and later
  1. Configure VTI tunnel in accordance with NCOS: Virtual Tunnel Interface (VTI) IPSec VPN
    1. Set 0.0.0.0/0 as the tunnel interface IP address (screenshot below)
      • image
    2. Do not configure a static route in the tunnel configuration
  2. Configure static route in Main table 
    1. Navigate to Networking > Routing > Static and Policy Routing
    2. Edit Main Table
    3. Do not specify the gateway. E.g.
      • VTI route unnumbered
    4. Save configuration