STEP 6: Attach the Wi-Fi antennas (IBR900 Models Only). - IBR900 - IBR900-Getting-Started/STEP-6-Attach-the-Wi-Fi-antennas-IBR900-Models-Only-.

IBR900 Series Mobile and Ruggedized IoT Router Quick Start Guide
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Quick Start Guide

For IoT Setups:

The IBR900 Ruggedized IoT Router includes Wi-Fi (stick) antennas. Attach the antennas to the ports marked 2.4/5GHz, as illustrated below.

  • Hold the antenna straight and twist the base to thread onto the connector.

  • Tighten with fingers only (maximum torque not to exceed 4 in-lbs).

    • Do not over-tighten.

  • Once the router is mounted and powered on, angle the antennas for optimal signal reception.

IBR900_attach_Wi-Fi_antennas.png

For Mobile Setups:

For mobile installations, refer to the Vehicle Installation Guide for COR Series Mobile Routers for antenna setup best practices.

Note

IBR950 router models do not include internal Wi-Fi and do not include 2.4/5GHz ports for connecting Wi-Fi antennas.