The following are test action examples.
Complete the following to specifiy a test action for VRRP.
Log into NetCloud Manager.
Select in the left-side navigation panel.
Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.
Select and then .
Navigate to > > .
Select a network.
Click Edit.
Click .
From the Test Name drop-down menu, select the test instance.
Select On Pass to execute the action if the test is successful. Otherwise, the action is executed if the test fails.
In the VRRP Priority field, enter a integer indicating the amount by which VRRP priority is changed. With the given configuration above, if the WAN modem test reports fail, the VRRP priority is increased by 4.
The IPVerify tunnel action allows the tunnel's state to be changed based on result of a given IPVerify Test. Complete the following to specify a test action for IPsec.
Log into NetCloud Manager.
Select in the left-side navigation panel.
Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.
Select and then .
Navigate to > > .
The IPSec VPN page displays with the Tunnels tab.
Select a a IPsec tunnel.
Click .
Navigate to page 6 of 6.
Under IPVerify, configure the following.
Note
Test 1 and Test 2 can both be configured to independently connect or disconnect tunnel.
From the Test Name field, select the test instance.
Select On Pass to execute the action if the test is successful. Otherwise, the action is executed if the test fails.
From the Tunnel State drop-down menu, select the desired state of tunnel when the IPVerify action is performed.
Click .