Finding the GRE Key from the NetCloud Exchange Service Gateway - Idenifying-a-NetCloud-Exchange-Site-Router-s-GRE-Key/Finding-the-GRE-Key-from-the-NetCloud-Exchange-Service-Gateway

Idenifying a NetCloud Exchange Site Router's GRE Key

ft:locale: en-US
ft:sourceName: Paligo_Prod
Document Type: Article

Two Command Line Interface (CLI) commands may be used to identify the GRE key from the NetCloud Exchange Service Gateway.

Use one of the following methods to identify the GRE key:

Enter the show ike ike-sa CLI command.
1. Log into NetCloud Manager.
2. Click Devices in the left-side navigation panel.
3. Select the NCX Service Gateway from the Routers table.
4. Click the Remote Connect menu, and then select Console.
5. Enter the show ike ike-sa command.
  [admin@cradlepoint.com@NCXSG-VMware-faa: /]$ show ike ike-sa VPN Local-Addr Local-ID Remote-Addr Remote-ID State Child-SAs NCX_VPN 216.64.128.11 HUB1 216.64.128.2 98304 established 1 NCX_VPN 216.64.128.11 HUB1 216.64.128.2 131072 established 1 NCX_VPN 216.64.128.11 HUB1 69.92.7.238 65536 established 1 NCX_VPN 216.64.128.11 HUB1 96.19.115.102 32768 established 1
  The GRE key appears in the Remote-ID column.
Enter the xlate-rules CLI command.
1. Log into NetCloud Manager.
2. Click Devices in the left-side navigation panel.
3. Select the NCX Service Gateway from the Routers table.
4. Click the Remote Connect menu, and then select Console.
5. Enter the xlate-rules command.