- Step 1: Log into the router's NCOS Page. For help with logging in please click here
- Step 2: Navigate to Networking -> Local Networks -> Local IP Networks
- Note: Steps 2 - 4 are recommended but optional, you will not be able manage the Cradlepoint locally if not followed
- Step 3: Select IPPT Interface and then select Edit
- Step 4: Select Access Control and then check Admin Access
- Step 5: Navigate to Networking -> VLAN Interfaces
- Step 6: Select the UID lan and then select Edit
- Step 7: Change the Mode from LAN to WAN and then select Save
- Note: You will need to now navigate to http://192.168.10.1 and be connected to LAN2 port on the Cradlepoint
- Step 8: To confirm you now have a WAN port available, navigate to Connection Manager and you should see "LAN 1 (VID: 1)
