Changing the LAN IP Address - NCOS-How-to-Change-the-LAN-IP-Address-of-a-Cradlepoint-router/Changing-the-LAN-IP-Address

Changing the LAN IP Address of an Ericsson Cradlepoint Router
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Article

Complete the following to change the LAN IP address of an Ericsson Cradlepoint router:

  1. Log into NetCloud Manager.

  2. Select Devices in the left-side navigation panel.

  3. Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.

  4. Select Configuration and then Edit.

  5. Navigate to NETWORKING > Local Networks > Local IP Networks.

  6. Select the LAN.

  7. Select Edit.

  8. Select IPv4 Settings from the left-side navigation menu.

    Note

    The router's IP on this network is set here. This will be the Default Gateway on your network.

  9. Change the IP address to the desired network address.

  10. Select Save.

    Note

    After changing the default router IP address, access the router's administrative console using the new address. Refresh the IP address on your computer or device by disconnecting and reconnecting from the router or by refreshing to obtain a new IP.