The following RADIUS attributes are supported. Note that passing these attributes in the call to the RADIUS server overrides any settings made in the router's setup pages.
Acct-Interim-Interval – Interval, in seconds, that the router will send Alive packets to the RADIUS accounting server.
ChilliSpot-Max-Input-Octets – Maximum number of bytes the user is allowed to transmit. After this limit has been reached, the user will be disconnected.
ChilliSpot-Max-Output-Octets – Maximum number of bytes the user is allowed to receive. After this limit has been reached, the user will be disconnected.
ChilliSpot-Bandwidth-Max-Down – Maximum bandwidth Down.
ChilliSpot-Bandwidth-Max-Up – Maximum bandwidth Up.
Idle-Timeout – Log out if the idle timeout is reached.
Session-Timeout – Log out once session timeout is reached.
WISPr-Bandwidth-Max-Down – Maximum bandwidth Down but in bits/sec.
WISPr-Bandwidth-Max-Up – Maximum bandwidth Up but in bits/sec.
WISPr-Session-Terminate-Time – The time when the user should be disconnected in ISO 8601 format (YYYY-MM- DDThh:mm:ssTZD).
NAS-ID – NAS-ID provides users with the ability to configure a NAS-ID attribute and include it in the Access-Request message when RadSec is used. The NAS-ID attribute allows the server to confirm information about the sender of the authentication request.