Complete the following steps to send logs to syslog server from a VPN. This setting causes Syslog traffic to be sourced from the LAN IP of the Ericsson Cradlepoint router on the selected local network, which is necessary for the traffic to be allowed to pass through a policy-based tunnel.
IPsec VPN tunnel
Syslog server located at remote end of a VPN tunnel
Log into NetCloud Manager.
Select in the left-side navigation panel.
Select the desired router.
Select the menu and then select .
Select Open Device UI.
Log in to the device from the LOGIN screen. The default username is "admin". Default passwords are supplied with routers.
Navigate to > > .
Under LAN Network Binding, select .
From the Service drop-down menu, select .
From the Source drop-down menu, select a local network that is allowed in the tunnel.
Select .