Enabling Link Layer Discovery Protocol-Media Endpoint Discovery - NCOS-LLDP-Status-and-Configuration/Enabling-Link-Layer-Discovery-Protocol-Media-Endpoint-Discovery

Link Layer Discovery Protocol
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Article

Use the following steps to enable Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) on an Ericsson Cradlepoint device:

  1. Log into NetCloud Manager.

  2. Select Devices in the left-side navigation panel.

  3. Select the desired router.

  4. Select the Remote Connect menu and then select Device UI.

  5. Select Open Device UI.

  6. Log in to the device from the LOGIN screen. The default username is "admin". Default passwords are supplied with routers.

  7. Navigate to SYSTEM > Administration > LLDP.

  8. (Optional) Select Enable on WAN to enable LLDP on the WAN.

  9. (Optional) Select Enable on LAN to enable LLDP on the LAN.

  10. Select Save.

  11. Navigate to STATUS > LLDP to view all the power requests made by the devices.

  12. Navigate to NETWORKING > Local Networks > PSE.

  13. Enable LLDP power negotiation on the required ports.

    1. Select the port.

    2. Select Edit.

    3. Select Enabled for the mode.

    4. Select Save.