Complete the following steps to configure port proxy rules.
Log into NetCloud Manager.
Select in the left-side navigation panel.
Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.
Select and then .
Navigate to > >
Under Port Proxying Rule, select .
The Edit dialog displays.
In the Name field enter a name.
In the Local Port(s) fields enter the IP port(s) on the LAN to proxy to a remote computer.
In the Remote Computer field, enter the IP address of remote computer to receive proxied traffic.
In the Remote Port(s) fields, enter the IP port (first if a range) on the remote computer to receive proxy traffic.
Note
The Remote port range is not a 1-to-1 mapping to the Local port range. The system will determine the first available Remote port, in the range, and use it. If 1-to-1 port mapping is desired, you will need to enter each individually.
From the Protocol drop-down menu, select the IP protocol traffic to proxy.
Select and .