Assigning a Subinterface to the SFP Port and Assigning the SFP Port to a VLAN - NCOS-VLAN-Trunking-Configuration/Assigning-a-Subinterface-to-the-SFP-Port-and-Assigning-the-SFP-Port-to-a-VLAN

Creating VLANs and Trunked VLAN Configurations on Cradlepoint Routers
ft:locale
en-US
ft:sourceName
Paligo_Prod

Use the following steps to assign a subinterface to the SFP port on your router and assign the SFP port to a VLAN.

  1. Log into NetCloud Manager.

  2. Select Devices in the left-side navigation panel.

  3. Select a router from the Routers page. Alternatively, to make configuration changes to a group, navigate to the Groups page and select a group.

  4. Select Configuration and then Edit.

  5. Navigate to NETWORKING > Local Networks > SFP.

  6. Select sfp0, and then click Edit.

  7. Under Subinterfaces, click Add.

  8. In VID field enter the VLAN ID to associate with the SFP port.

  9. From the Mode drop-down menu, select a mode.

  10. Click Save.