Dynamic VLAN feature is designed to work with most RADIUS servers (ie: FreeRADIUS and Windows NPS) that support the Tunnel-Private-Group-ID attribute. This attribute represents the group ID for a particular, tunneled session. The Tunnel-Private-Group-ID attribute may be included in the Access-Request packet if the tunnel initiator can pre-determine the group resulting from a particular connection. The Tunnel-Private-Group-ID attribute should be included in the Access-Accept packet if this tunnel session is to be treated as belonging to a particular private group. Private groups may be used to associate a tunneled session with a particular VLAN. For more details, refer to RFC-2868.
Configure a dynamic VLAN using the following steps:
Configure a dynamic VLAN using the following steps:
1. Log into the router's NCOS Page. For help with logging in see NCOS: Accessing the Setup Pages of a Cradlepoint router.
2. Click on the NETWORKING tab.
3. Click Local Networks from the NETWORKING tab sub menu, and then select the Wifi Radio on which to configure Dynamic VLANs.4. Locate the Wireless Access Points / SSIDs section, and then check the box next to the SSID to modify.
5. Click the Edit button to open the Edit SSID window and modify the WiFi Network.
Figure 1: WiFi Radio Settings
Figure 2: Edit SSID Settings-Dynamic VLAN
7. Click the Save button to save the configuration.
Change of Authorization (CoA) Configuration
There are times when an administrator needs to change session characteristics without the router initiating the exchange. For example, disconnect packets cause user session(s) to be terminated immediately, whereas CoA packets modify session authorization attributes such as VLAN assignment. The CoA Client is the entity originating Change of Authorization (CoA) Requests or Disconnect-Requests. While it is possible that the CoA Client is co-resident with a RADIUS authentication or accounting server, this may not necessarily be the case. For more details, refer to RFC-5176.
There are times when an administrator needs to change session characteristics without the router initiating the exchange. For example, disconnect packets cause user session(s) to be terminated immediately, whereas CoA packets modify session authorization attributes such as VLAN assignment. The CoA Client is the entity originating Change of Authorization (CoA) Requests or Disconnect-Requests. While it is possible that the CoA Client is co-resident with a RADIUS authentication or accounting server, this may not necessarily be the case. For more details, refer to RFC-5176.
Configure a COA authorization using the following steps:
1. Log into the router's NCOS Page. For help with logging in see NCOS: Accessing the Setup Pages of a Cradlepoint router.
1. Log into the router's NCOS Page. For help with logging in see NCOS: Accessing the Setup Pages of a Cradlepoint router.
2. Click on the NETWORKING tab.
3. Click Local Networks from the NETWORKING tab sub menu, and then select the Wifi Radio on which to configure the COA configuration.
4. Locate the Wireless Access Points / SSIDs section, and then check the box next to the SSID to modify.
5. Click the Edit button to open the Edit SSID window and modify the WiFi Network.
Figure 3: WiFi Radio Settings

6. Configure WPA/WPA2Enterprise Security mode, then place a check in the box next to Change of Authorization (CoA) to enable CoA support on this WiFi Network.
7. Enter the IP address of the CoA client authorized to send CoA messages in the CoA client IP field. An IP address of 0.0.0.0 allows any client with the CoA shared key to send CoA messages.
8. Enter the CoA port in the CoA port field (default port is 3799).
9. Enter the CoA shared key in the CoA Shared Key field (64 characters max).
Figure 4: Edit SSID Settings-COA Configuration
10. Click the Save button to save the configuration.