Adding Port Groups - NetCloud-Exchange-Service-Gateway-Deployment-Guide-VMware-ESXi/Adding-Port-Groups

NetCloud Exchange Service Gateway Deployment Guide - VMware ESXi
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Deployment Guide

Complete the following steps to add the NetCloud Exchange Service Gateway port groups:

  1. Right-click Networking in the left-side navigation panel.

    Main screen of VMware ESXi hypervisor highlighting the Networking menu item.

  2. Click Add port group.

    ESXi Networking menu highlighting the Add port group item.

  3. Enter a descriptive name for the WAN port group.

  4. Select the previously defined WAN vSwitch from the Virtual switch drop-down list.

  5. Select Add.

  6. Repeat this procedure for the MGMT and LAN interfaces.

Refer to your VMware/Network Administrator for VLAN configurations and requirements.