Verifying the Virtual NIC Connectivity to the Physical NIC - NetCloud-Exchange-Service-Gateway-Deployment-Guide-VMware-ESXi/Verifying-the-Virtual-NIC-Connectivity-to-the-Physical-NIC

NetCloud Exchange Service Gateway Deployment Guide - VMware ESXi
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Deployment Guide

Complete the following steps to review the new virtual NIC connectivity to the physical NIC for each interface:

  1. Click Networking in the left-side navigation.

  2. Click the Port groups tab.

  3. Click one of the newly created port groups.

    ESXi Networking Port groups page highlighting a port group in the list.

  4. Review the vSwitch topology.

    ESXi vSwitch topology for the WAN0 interface.

    Note

    The topology may differ based upon VLAN and port group configuration.

  5. Repeat this process for each newly created port group.