Advertising the LAN subnet through Border Gateway Protocol - NetCloud-Service-Gateway-Integration-with-Amazon-Web-Services-Transit-Gateway/Advertising-the-LAN-subnet-through-Border-Gateway-Protocol

NetCloud Service Gateway Integration with Amazon Web Services Transit Gateway
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Configuration Guide

Complete the following steps to advertise the LAN subnet through Border Gateway Protocol (BGP):

  1. Select Devices in the left-side navigation panel.

  2. Select the NCX Service Gateway from the Routers table.

  3. Select Configuration and then Edit.

  4. Navigate to Config > VRF > main > routing > bgp > address-family > ipv4-unicast.

  5. Select the plus sign (+) next to network.

  6. For the ip-prefix, enter the CIDR for the NetCloud Exchange Service Gateway's LAN subnet. The address 10.1.50.0/24 is used in this guide.

    The service gateway Configuration page highlighting the ip-prefix field.

  7. Select Save.

  8. Select Commit to push all the changes to the

Note

If needing to roll back the integration, remove the BGP network statement created in this section before disabling BGP for the Secure Connect network.