Complete the the following steps to configure Out-of-Band Management Console access.
Log into NetCloud Manager.
Select Devices in the left-side navigation.
Select the router on which to configure remote connect.
From the Remote Connect menu, select.
Select to create a new connection.
The Add Serial Profile panel displays on the right.
In the Name field, enter a name.
From the Serial drop-down menu, select a serial port to use.
The L950 adapter can support a two, four, or eight port USB HUB plugged into its USB port and supports connecting up to eight remote console ports. The default is Serial 1, if only using a single USB cable.
Once created the device is added to the grid for selection.