To setup Console access to any third-party router, configure the USB port on the adapter:
Log into NetCloud Manager.
Select Groups in the left-side navigation.
Select the L950 adapter’s group.
Select Configuration.
Select Edit.
Navigate to > .
Select one of the following from the drop-down menu in the USB Serial Adapter Configuration section.
For FTDI USB to Serial RS232 port adapters, select .
For Cisco routers with micro-USB console ports, select . This option supports a USB Type-A to USB Mini/Micro cable for connecting to Cisco routers.
Note
Cisco does make available a dongle for RJ45 to micro-USB connection. This is useful if your existing cabling already had RJ45 connectors.
For other third-party devices at a remote site, you will need the appropriate cable or adapter to connect the third-party devices. See USB-to-Serial Adapters Validated with Ericsson Cradlepoint Endpoints.
From the Baud Rate drop-down menu, select the baud rate of the device to which you are connecting. Some are at a high 115K baud rate, while most are at 9600.
Select .