The COR series mobile routers include a three-meter, 22 AWG four-pin power connector. This diagram shows the connector pinout on the router:
PIN | Wire Color | Definition | Details | |
|---|---|---|---|---|
 | 1 | Black | Ground | Ground to the vehicle chassis |
2 | Red | Power | VDC battery constant | |
3 | Orange | Input | VDC ignition sensing accessory input | |
4 | Blue | Output | General-purpose I/O (GPIO) |
Note
The Ericsson Cradlepoint device uses a unique pin layout, which may differ from other industry standards.
Connect the red wire (power) to the battery positive and the black wire to ground. If the power is connected correctly, the LED lights will light up on the router.
If using Ignition Sensing:
Connect the orange wire (input) to the ignition (or accessory) switch. The input wire may be attached directly or through the fuse panel. See the images below for wiring examples.
IBR900
IBR1700