STEP 3: Attach the Antennas. - W1850 - W1850-Wideband-Adapter-Quick-Start-Guide/STEP-3-Attach-the-Antennas.

W1850 Series Wideband Adapter Quick Start Guide
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Quick Start Guide

  1. Attach the four (4) modem antennas to the ports marked MAIN and DIV.

  2. Hold the antenna straight and twist the base to thread onto the device. Tighten with fingers only (maximum torque not to exceed 4 in-lbs/.45 Nm). Do not over-tighten.

  3. Angle the antennas as shown in the following image:

    image3.png

Note

Ensure that the antennas are not near metal or other radio frequency (RF) reflective surfaces.