Attach Grounding Cable - R920 - RX20 - W1855 - W1855-Series-5G-Wideband-Adapter-Installation-Guide/Attach-Grounding-Cable

Cradlepoint W1855 Series 5G Wideband Adapter Installation Guide

ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Quick Start Guide

Important

Follow all local electrical codes when grounding the adapter. The grounding lug can accept a 14-gauge to16-gauge grounding wire.

  1. Find the grounding lug from the Small Accessories Kit.

  2. Unscrew the clamping screw with a flat-bladed screwdriver.

  3. Insert a short length of stripped grounding cable into the clamp hole on the grounding lug.

  4. Tighten the clamping screw until it holds the grounding cable in place very securely.

  5. Remove the ground connection screw from the adapter (using a Philips screwdriver) and then use it to connect the grounding lug to the adapter with the ground connection screw.

  6. Make sure the other end of the grounding cable is securely connected to ground.