The Cradlepoint W1855 Series 5G Wideband Adapteris purpose-built for exterior mounting. Cradlepoint recommends installation by a professional. The following includes considerations when identifying a location for mounting:
Ensure that the mounting surface is clear of any obstructions or objects that may interfere with the antennas, signal reception, or cables.
Position the device for optimal signal reception.
For the adapterto maintain its rating against hurricane force winds (up to 137 mph sustained), the following must be met when pole mounted:
The pole must be trade-size schedule 40 pipe, rigid conduit (steel or aluminum), or EMT pipe that is at least 3.8 centimeters (1.5 inches) outside diameter (OD). The use of larger OD pipe is supported but requires customer-supplied hose clamps. The included hose clamps support 3.8-cm (1.5-inch) to 6.4-cm (2.5-inch) OD pipe.
The height of the pole above the anchor point can be no higher than 3 meters (10 feet).
If you plan to use the included PoE injector, the Ethernet cable running from the adapter installation site to the injector must not be longer than 100 meters (328 feet).
For more information, see the Safety, Regulatory, and Warranty Guide insert that came with your device.
Important
The W1855 Series 5G Wideband Adapterrequires increased separation distances in relation to other networking hardware. Therefore, Cradlepoint recommends that all 5G adapters be installed by a professional. For assistance with installation or in locating a professional installer, contact Cradlepoint Sales and Support.
Environmental Considerations
The W1855 Series 5G Wideband Adapteris designed to operate or remain viable in storage within the following limits:
Temperature |
|
Humidity |
|
Planning Site Work
The instructions in this guide are ordered so that all the adapter-related steps are complete before accessing the final elevated installation location:
Prepare the adapter completely with all attachments, including inserting the SIMs, preparing cables and grounding wire, and attaching the backplate and antennas.
Note
Cradlepoint recommends that you test the adapterto verify functionality before moving the adapterto the final installation location. See the Cradlepoint W1855 Series 5G Wideband AdapterQuick Start Guide for steps.
Run the Ethernet cables from the installation site to the PoE injector inside your location.
Access the elevated position to install the adapter, taking with you the prepared adapter, installation tools, mounting bracket, and Ethernet cables.
Complete the elevated installation.
Install, connect, and test the connections inside the building to the PoE injector or suitable PoE capable router.