Understanding LEDs - W2005 - W2005-Quick-Start-Guide/Understanding-LEDs

W2005 Outdoor 5G Wideband Adapter Quick Start Guide
ft:locale
en-US
ft:sourceName
Paligo_Prod
Document Type
Quick Start Guide

This section discusses the LED lights on the W2005 adapter and what they indicate.

image11.png

Status Indicator

Behavior

image12.png

Power: The Cradlepoint W2005 must be powered using an approved 802.3bt PoE power source.

image13.png

  • No Light = Not receiving power. Check the power switch and the power source connection.

image14.png

  • Green = Powered ON.

image15.png

  • Yellow = Attention.

image16.png

Wi-Fi Status: Blue LED bars indicate the Wi-Fi connection status.

image17.png

  • Solid Blue = Wi-Fi ON and operating normally.

image18.png

  • Blinking Blue = Wi-Fi is ON but not connected to a WAN source.

image19.png

Ethernet LAN Status: Indicates wired LAN connection information.

image13.png

  • No Light = Not connected.

image18.png

  • Blinking Blue = Data passing. Normal operation.

image20.png

4G LTE Modem Status: LED indicates the LTE modem status.

image14.png

  • Solid Green = Modem has established an active WAN connection.

image21.png

  • Blinking Green = Connecting.

image15.png

  • Solid Yellow = Modem is not active.

image22.png

  • Blinking Yellow = Data connection error. Log into NetCloud Manager to see alerts and troubleshoot issue.

image23.png

  • Blinking Red = Modem is resetting.

image24.png

5G Modem Status: LED indicates the modem's 5G status.

image13.png

  • No Light = No 5G connection.

image14.png

  • Solid Green = 5G Sub-6 GHz connected.

image21.png

  • Blinking Green = 5G Sub-6 GHz connection error. Log into NetCloud Manager to see alerts and troubleshoot issue.

image17.png

  • Solid Blue = mmWave (high band) connected.

image25.png

Signal Strength: Blue LED bars indicate the active modem's signal strength.

image26.png

  • 4 Solid Bars = Strongest signal.

image27.png

  • 1 Blinking Bar = Weakest signal (A blinking bar indicates half of a bar).

OTHER

Other LED Indicators

  • The Cradlepoint logo will light up white when connect to an active NetCloud Account.